M
Max Vittrup
Guest
Wir sollten eine öko demonstration haus machen im Tchechien machen und haben damit ein frage uber die 'U-value'.
Die haus sind eine 100 jahrige alten sheuer mit ein konstruktion von 4 feldstein ecken. Wir wirden gern diesen ecke draussen isolieren mit etwas dünner als stroh, und suchen etwas mehr ökologich als polystyren.
Leichtlehm gefallt uns, aber wir haben diesen information gefunden und jetzt bin ich nicht ganz sicher...
Haben jemand von Euch erfahrung mit dieses problem?
Max Vittrup Jensen - www.permalot.org
" We hope we can get a good insulation ( conductivity < 0.1 W/m °C) with few straw ( < 50 kg/ m3) if we use clay or lime binder."
Important for the insulation value is the real density of the installed leichtlehm, to achieve a value of 0.1 W/mK the density would have to be around 300 kg/m³, which a group at University Kassel, Germany found very difficult to achieve and too weak for plastering. Workability would start
at 700kg/m³, but to achieve a reasonable insulation of k=0,3/m²K or R19 the wall would need to be 70cm or over two feet deep , which is likely to rot in the german climate.
Usual old leichtlehm as used in timberframes has a density of 1200 kg/m³ and 0,47 W/mK as stated in DIN4108 of 1969.
All information is taken from the "Lehmbau-Handbuch", Gernot Minke, University of Kassel.
Yours, Alex
Die haus sind eine 100 jahrige alten sheuer mit ein konstruktion von 4 feldstein ecken. Wir wirden gern diesen ecke draussen isolieren mit etwas dünner als stroh, und suchen etwas mehr ökologich als polystyren.
Leichtlehm gefallt uns, aber wir haben diesen information gefunden und jetzt bin ich nicht ganz sicher...
Haben jemand von Euch erfahrung mit dieses problem?
Max Vittrup Jensen - www.permalot.org
" We hope we can get a good insulation ( conductivity < 0.1 W/m °C) with few straw ( < 50 kg/ m3) if we use clay or lime binder."
Important for the insulation value is the real density of the installed leichtlehm, to achieve a value of 0.1 W/mK the density would have to be around 300 kg/m³, which a group at University Kassel, Germany found very difficult to achieve and too weak for plastering. Workability would start
at 700kg/m³, but to achieve a reasonable insulation of k=0,3/m²K or R19 the wall would need to be 70cm or over two feet deep , which is likely to rot in the german climate.
Usual old leichtlehm as used in timberframes has a density of 1200 kg/m³ and 0,47 W/mK as stated in DIN4108 of 1969.
All information is taken from the "Lehmbau-Handbuch", Gernot Minke, University of Kassel.
Yours, Alex